Contamination is rife in many water-bodies around the world. This has resulted in the presence of fungi, viruses and bacteria which can be harmful and therefore a health hazard. Partly, contamination can be blamed on international firms which carelessly dump their waste in the waters so as to avoid the cost that comes along with the treatment of such waste and the correct disposal procedures. Many environmental groups have cried foul and demanded for the streamlining of the policies touching on industrial waste disposal. To arrest the spread of water-borne diseases, various authorities have established water testing labs.
Many are the times when the minerals found in water react with the household plumbing materials and service lines therefore resulting in the corrosion of the piping system. As a consequence, lead which is harmful and therefore poses a health hazard is deposited in the storage facilities alongside the water. Just as a precautionary measure, most laboratories test for the presence of lead as part of regular monitoring procedures.
The results of the test help to give a picture of how the whole system although not pin pointing to any particular household. To make this commodity safe for drinking, faucet and pitcher filters can be used to filter off the lead. There are many counterfeit filters in the market hence the need to acquire only filters that are certified by the NSF.
Detecting quality problems is an easy process. Factors to look out for include the color, odor and whether any stains occur on clothes washed using this commodity. Contamination easily occurs if the well is too near a septic system. If this is the case, one has to carry out regular checks on the septic systems so as to ensure they are not leaking.
It is a statutory requirement that all laboratories make their findings known to the local federal, tribal or state agency. These agencies have a responsibility of ensuring that the water-resources are free of contamination and that they do not cause a health risk. Annual consumer confidence reports should be generated by the quality control engineers and proper filing procedure carried out to avoid mix up of information. The report usually contains the procedures carried out and the findings and recommendations of the technicians.
The quality record has to be regularly updated as it may come in handy in solving any future problems and in claiming compensation if any damages occur to your system. The tests should be carried out at least once per year. Detailed testing should be conducted on the presence of total coliform bacteria, dissolved solids, nitrates and the PH levels especially if the well was recently dug or there has been a major overhaul of the plumbing system.
If the family is expecting a new baby, tests for presence of nitrates should be carried out during pregnancy, before the infant is brought home from the hospital and during the first half year of the young ones life. The test is most effective if carried out during summer or spring that is after a rainy period.
Water testing labs should always test for the presence of mineral salts which include iron, manganese and chloride. The salts are known to easily dissolve and therefore can easily go unnoticed. After every three years, the tests should one again be carried out. Tests for volatile organic compounds should be carried out only if necessary since they are very expensive to conduct.
Many are the times when the minerals found in water react with the household plumbing materials and service lines therefore resulting in the corrosion of the piping system. As a consequence, lead which is harmful and therefore poses a health hazard is deposited in the storage facilities alongside the water. Just as a precautionary measure, most laboratories test for the presence of lead as part of regular monitoring procedures.
The results of the test help to give a picture of how the whole system although not pin pointing to any particular household. To make this commodity safe for drinking, faucet and pitcher filters can be used to filter off the lead. There are many counterfeit filters in the market hence the need to acquire only filters that are certified by the NSF.
Detecting quality problems is an easy process. Factors to look out for include the color, odor and whether any stains occur on clothes washed using this commodity. Contamination easily occurs if the well is too near a septic system. If this is the case, one has to carry out regular checks on the septic systems so as to ensure they are not leaking.
It is a statutory requirement that all laboratories make their findings known to the local federal, tribal or state agency. These agencies have a responsibility of ensuring that the water-resources are free of contamination and that they do not cause a health risk. Annual consumer confidence reports should be generated by the quality control engineers and proper filing procedure carried out to avoid mix up of information. The report usually contains the procedures carried out and the findings and recommendations of the technicians.
The quality record has to be regularly updated as it may come in handy in solving any future problems and in claiming compensation if any damages occur to your system. The tests should be carried out at least once per year. Detailed testing should be conducted on the presence of total coliform bacteria, dissolved solids, nitrates and the PH levels especially if the well was recently dug or there has been a major overhaul of the plumbing system.
If the family is expecting a new baby, tests for presence of nitrates should be carried out during pregnancy, before the infant is brought home from the hospital and during the first half year of the young ones life. The test is most effective if carried out during summer or spring that is after a rainy period.
Water testing labs should always test for the presence of mineral salts which include iron, manganese and chloride. The salts are known to easily dissolve and therefore can easily go unnoticed. After every three years, the tests should one again be carried out. Tests for volatile organic compounds should be carried out only if necessary since they are very expensive to conduct.
About the Author:
We have all the top resources at www.watertestwholesale.com to help you become more informed about water testing labs. Explore our entire web pages by entering the website from here on http://www.watertestwholesale.com.
0 comments:
Post a Comment